Aivaka

WB-100 is a transmitter and receiver kit to connect a standard 24V controller to a standard 24V valve using a unique power technology in combination with ISM band wireless scheme (certified in US by FCC.) It replaces traditional wires between standard 24V controllers and 24V valves. It is an ideal solution...

WB-801 is a Transmitter & Receiver kit to provide a wireless connection between a controller and a flow-sensor.

WB-124 creates a wireless connection between a standard 24V controller and a 24V valve in the field. Everything in the system stays the same, except the wires between the valve and the controller are completely removed.

WB-312R, 331R and 363R are designed to relocate a controller.to a different location without running wires, or combine numerous controllers into a single controller in a new location. WB-312R is designed to handle up to 12 valves, and WB-331R and WB-363R handle up to 31 and 63 valves each, repectively

WB-312T replaces the wiring between the controller and valves and provides a wireless connection between them. WB-312T is a transmitter designed to handle up to 12 different irrigation zones (from any 24V-AC controller). Each valve requires its own receiver to work with WB-312T and it can be purchased...

WB-200 is designed to operate a DC latched solenoid from a standard 24V controller. A multi zone controller can operate both 24V and DC solenoids.

Let the soil moisture set the irrigation automatically, not an app or equation. Make it simple. WS-601 is a wireless sensor kit that can operate a valve automatically (via WB-100 receiver) without any app or human interaction or a controller. Set the desired moisture level on WS-601 with a knob (NOT...

WR-115/230 is a wireless Pump Start Relay with 24V-AC output to create a wireless connection between a controller and a pump. They simply replace the wires between the controller and pump's contactor. Multiple controllers can control single pump. WR-115 is designed for 115V pumps, and WR-230 is...

WB-7XX can accept multiple moisture sensors (WS-601/621) for a wired system to allow both controller and a moisture sensor operate the valve independently. Watering can be done based on real time, measured moisture of the soil.