Hendrickson Bros

A proven preset pressure regulator designed specifically for low flow drip irrigation applications, in 6 popular pressures.

• For low flow drip irrigation
• 6 popular pressures
• Resists corrosion
• Fits all standard hose bibs.

The FC79 High Volume Flow Control is designed for applications that require flow control and water distribution balance. This flow control is an excellent way of assuring that a specific amount of water is delivered to the end user, avoiding waste and conserving water. The FC79 provides precise pressure...

The FCC80 Flow Control Check Valve is the latest innovation from Hendrickson Bros., the leader in drip irrigation. It keeps pressure constant ensuring consistent flow across varying terrains. Like all Hendrickson Bros. products, the FCC80 is built to be rugged and long-lasting, ensuring optimum performance...

The FC77 optimizes the performance of micro sprayers by balancing line pressure for uniformity and providing consistent flow rates in spite of differences in terrain elevation or friction loss.

• Ensures optimum micro sprayer operation
• Balances line pressure for uniformity
•...

• 4 outlets which fit 1/4" tubing (.187 ID).
• Available in 3 flow rates, 4, 8, 12 GPH.
• Is pressure compensating.
• Operating pressure 18 to 100 PSI.
• Has 1/2 FPT inlet.
• Comes with 2 caps to cover unused outlets.

The FC76 Air Jet Bubbler offers a constant and gentle water flow in system with line pressures up to 100 psi. The FC76 has no moving parts and requires no maintenance or adjustment. The simple patented design of the FC76 offers the user precise and consistent flow control. The slow, measured water flow...

The FC70-A is for agricultural and industrial applications. The FC70-C is custom designed and balanced to your specific irrigation device. Hendricksons patented flow technology is the heart of the FC70; an economical way to add pressure compensation to a variety of water emission devices to optimize...

The FLD500 Break Away Flow Limiting Device is designed with an internal flow control to substantially reduce the amount of water loss in the event of a sprinkler riser breakage. The irrigation system remains operational and balanced even in the event of multiple breaks in the system. The FLD500 can be...

Filter surface area is 6.0 sq. in. (38.7 cm2) n Screen is 150 mesh/100 micron n Inlet 1" NPT or BSP n Outlet 1" NPT or BSP n Overall length 4.4" n Width 2.9" n Operating Pressure 0-160 psi (0-1104) kPA

• A Heavy duty all purpose 1" plastic filter with a Heavy Duty...

The DG6000 Pre-Set Pressure Regulator is ideal for balancing pressures throughout any medium-flow irrigation system. It is also used for controlling the output of sprays and sprinklers on center pivot and lateral move irrigation systems. The DG6000 is presently available with regulated output pressures...

The PR5500PP offers exceptional outlet pressure control to provide consistent performance from 0 to 720 gallons per hour. The PR5500PP effectively regulates at the following pressures: 10, 20, 30, 40 and 50 PSI, all preset to exacting factory specifications.

• PR5500PP Preset Pressure...

The PR5500 offers exceptional outlet pressure control to provide consistent performance from 20 to 720 gallons per hour. The PR5500 offers the widest operation range available. The PR5500 effectively regulates at the following pressures: 10, 15, 20, 25, 30, 35, and 50 PSI, all preset to exacting factory...

The PR7500 PRESET PRESSURE REGULATOR is a high flow regulator that regulates to outlet pressures of 50 to 80 PSI and has a flow range of 1 to 35 GPM*. This unique regulator comes in a 90" angle configuration with a 1" Female Pipe Thread on both the inlet and outlet.

• PR7500:...

The PGS Rotor is specifically designed for use in agriculture, greenhouse, nursery, and landscape. The PGS Rotor is produced using the highest quality materials. Consistency and quality are our number one concern. Quality assurance for overall excellence, performance, and durability are ongoing at Hendrickson...

Retrofit existing sprinkler to water saving drip or sprayer systems.

• Drip
• Micro Spray
• Bubblers
The MPR converts standard sprays and bubblers to low water conserving micro irrigation. The MPR can be installed on a 1/2" riser or a fitting with...

The DG41 is the effective and economical way to prevent the risk of back-flow contamination from outdoor hose bibb connected devices. Constructed of high-strength ABS plastic the DG41 resists corrosion for increased reliability and long-life. Laboratory tested and industry approved since 1984.

•...

The VS is an adjustable micro sprinkler stake. Provides full control for micro stream bubblers or micro sprays. The valve stake can be opened for increased flow as plants mature. Great for use in containers and pots.

• Adjustable micro sprinkler stake

The J10 Hose Bibb Vacuum Breaker prevents backsiphonage through the exterior hose bibb connection. Back- siphonage can occur whenever a negative line pressure (vacuum or partial vacuum) is present that causes the reversal of the normal line flow. The use of the J- 10 Hose Bibb Vacuum Breaker greatly...

The PR8000 PRESET PRESSURE REGULATOR is a high flow regulator that has a range of 1 to 35 gpm. This regulator has been designed to convert high pressure to the desired pressure. The PR8000 is specifically designed for use in high flow applications such as agriculture, greenhouse, nursery and landscape.

•Wide...

Known for innovation in modern irrigation products, the PR8000 fills the need for a non-angled, straight-through regulator with the flexibility of 7 different preset pressures 10, 20, 25, 30, 35, 40 and 50 psi.

The PR25-9 is a 9 outlet pressure regulating drip manifold. The PR25-9 can be installed on any 1/2" riser or fitting and easily converts traditional spray systems to drip, micro spray, or micro stream bubblers. Separate pressure regulation is not necessary since each PR25-9 automatically reduces...

The PR5800 offers exceptional outlet pressure control to provide consistent performance from 1/2 to 12 gallons per minute. The PR5800 offers the widest operation range available. The PR5800 effectively regulates at the following pressures: 10, 15, 20, 25, 30, 35, 40, and 50 PSI, all preset to exacting...

A forerunner in the field of drip irrigation, Hendrickson has released their latest innovation the FCC80 Flow Control Check Valve. It's ideal for micro sprayer and fertigation operations.

The 7000 screen and PR700 Regulator can be paired with any valve to provide the best in regulation and filtering. Both can be serviced from the top to make maintainence easy.